Best Dirt Bike Phone Mounts of 2026

A phone mount on a dirt bike has one job, and it isn't holding your phone on the drive to the trailhead. It's holding it through the washboard fire road, the root shelf you didn't see, and the landing that came in harder than you planned. I've watched a phone leave a handlebar at speed because a plastic jaw gave up, and it made me picky about clamps in a way I'm not picky about much else.

We've spent the last four months running 14 mounts on trail bikes, and the differences show up fast — mostly in the locking mechanism and in whether a mount does anything about vibration, which is what actually kills phone cameras out here.

The other thing first-time buyers miss is that the phone size range on the box usually assumes a bare phone, so a thick case can push you out of the fit you thought you had. A vibration dampener is the feature most people skip over and later wish they hadn't. Below are the ones that stayed put, sorted roughly by how you'll actually use them.

The Best Dirt Bike Phone Mounts

1

BRCOVAN M26-C1 Best Overall

96 /100
TKZ Score Outstanding

Key details

Phone Fit
5.03-7.60 in long, up to 20 mm thick
Handlebar Fit
0.5-1.26 in (12-32 mm)
Cradle
PA66-GF30 with 304 stainless rods
Vibration Damping
Built-in dampener
View on Amazon

Twenty millimeters of cradle depth is what earned this mount the top spot. That is enough room for a big phone in a rugged case rather than a slim shell, and the jaws open to 7.6 inches long and 3.46 inches wide, so a 7.2-inch handset drops in without a fight. Nobody pulls their case off to go riding, and this is the pick here that never asks.

Damping is built in rather than sold as an accessory. The body is PA66-GF30 with 304 stainless telescoping rods and an aluminum handlebar base, so the cradle holds its shape against the bar instead of flexing, and the silicone lining absorbs what gets through. The clamp covers 0.5 to 1.26 inches, which takes a 7/8-inch dirt bike tube and the thicker sections of a tapered bar, with four rubber inserts to make up the difference.

Two details show it was drawn for a motorcycle rather than a bicycle. The socket arm and the bar base use security screws that need the supplied wrench, so the mount does not walk off in a parking lot, and it does take a moment longer to reposition than a hand-tightened buckle. BRCOVAN also puts a rear-view mirror base in the box, so the cradle can move to a bike with mirrors.

Fitting it takes a few minutes with the hex key in the box, but look at the bar first. The clamp body and the socket arm both need straight, round tube to sit on, and handguards, a steering stabilizer or a GPS bracket can eat the run between grip and triple clamp.

Pros

  • Clamps 0.5- to 1.26-inch bars
  • Vibration dampener included
  • Cradle takes 7.6-inch phones up to 20 mm thick

Cons

  • Bulky 400 g body needs clear bar space
Our verdict

For a dirt bike, this is the mount we reach for first: a built-in dampener, a cradle that swallows a cased big phone, and a clamp that fits both common bar sizes.

Check Latest Price
2

Quad Lock Handlebar Mount Best Locking System

95 /100
TKZ Score Outstanding

Key details

Phone Fit
Quad Lock cases and adapters only
Handlebar Fit
7/8 in (22 mm) to 1-1/4 in (32 mm)
Lock
Patented dual-stage
Dampener
Optional, sold separately
View on Amazon

The listed price does not buy a working setup. Quad Lock's cradle locks only onto a Quad Lock case or a universal adapter, both sold separately, and the vibration dampener the company recommends for motorcycle use is another purchase on top. Add it up and the whole system costs more than anything else on this page, which is the first thing to be honest about.

What the money buys is the best lock here. The dual-stage interface takes the phone with a push and a twist, and once it is in, cradle and phone behave as one piece: no arms to pry open, nothing crossing the screen, no creep around the bar. That is the difference between a mount you tolerate and one you use on every ride, and it is why riders who have standardized on the system tend to stay with it.

The clamp is light on the bar and covers 7/8 to 1-1/4 inches, which handles a dirt bike's 7/8-inch tube and the fatter bars on a dual-sport or an adventure bike. The catch is the ecosystem rather than the hardware: a second bike means a second case, and a spare phone means a third.

Pros

  • Dual-stage lock holds the phone rigid
  • Fits 7/8- to 1-1/4-inch bars
  • Phone twists off in one motion

Cons

  • Proprietary case or adapter adds cost
  • Mounting bar and bolts can work loose
Our verdict

The most secure interface in this group, as long as you are willing to buy into Quad Lock's case system and add the dampener for trail duty.

Check Latest Price
3

LISEN Bike Phone Holder Best Budget

94 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-6.8 in, up to 20 mm thick
Weight
3.53 oz
Handlebar Fit
0.6-1.57 in round bars
Lock
Toggle switch on back
View on Amazon

The LISEN goes on without a tool. A silicone-lined clamp tightens by hand onto any round bar from 0.6 to 1.57 inches, the whole mount weighs 100 grams, and moving it to another bike takes about a minute. Nothing in the fitting needs a wrench, which is more than several pricier picks here can say.

That is why it is the budget pick we keep recommending: what you give up at this price is phone size, not security. The cradle holds 4.7- to 6.8-inch phones and takes a case up to 20 mm thick, more depth than the Lamicall BM02 allows, and a toggle on the back locks the jaws once the phone is seated. The steel-and-ABS frame does not flex when you push the screen with a thumb, which is not something we can say for every cheap mount.

Pros

  • Fits bars from 0.6 to 1.57 inches
  • Takes a 20 mm case
  • Tool-free install and swap

Cons

  • Rattles over repeated chop
Our verdict

Our budget pick: a hand-tight clamp that goes on in a minute, a locking toggle, and no real sacrifice beyond the biggest phones.

Check Latest Price
4

Bovemanx BM-BK68 Best for Big Phones

93 /100
TKZ Score Outstanding

Key details

Phone Fit
4-7.2 in with case
Weight
2.12 oz
Handlebar Fit
0.59-1.77 in
Ball Joint
Aluminum-reinforced core
View on Amazon

Where the BRCOVAN is a stiff bracket, the Bovemanx is a sprung cradle. Four long arms pull open, the phone drops between them, and they close on the corners; they extend to 7.2 inches, so a large handset in a thick case sits inside the jaws rather than balanced on top of them.

The ball joint is where cheap mounts usually give up, and this one has an aluminum core inside the plastic that holds an angle over roots instead of drooping under the phone's weight. The clamp opens from 0.59 to 1.77 inches and tightens by hand, so one mount moves between a dirt bike and a dual-sport in seconds.

Sixty grams is the least weight any of these adds to the bar, and that combination of big-phone reach and near-nothing bulk is what earns it a place. One quirk comes with the design: the bottom cup is a fixed width, so an unusually wide phone rides high and sits closer to the top arms. Give the cradle a firm tug before each ride; the arms are the part that takes the load.

Pros

  • Arms stretch to 7.2 inches
  • Aluminum-cored ball joint
  • Weighs 60 g on the bar

Cons

  • Arms and clamp are the weak points
Our verdict

If your phone only just fits everything else, this is the cradle that takes it, and it adds almost nothing to the bar.

Check Latest Price
5

TruActive PH003 Best for Matching Your Bike

92 /100
TKZ Score Outstanding

Key details

Phone Fit
4-7 in, up to 18 mm thick
Arm
4 in ball joint
Install
Tool-free
Color Bands
6 included, reusable
View on Amazon

Six rubber bands in six colors come in the box, and on a bike with colored plastics and anodized parts this is the one mount here you can match to the build. The band runs over the top corners, a bottom ledge carries the phone's weight so the elastic only holds it back into the cradle, and it turns out to be a more sensible holder than the paint job suggests.

Underneath, it is a ball joint on a tool-free handlebar clamp, with four corner grips and 18 mm of depth for a cased phone; handsets from 4 to 7 inches fit the cradle. It is the pick for a rider with two bikes and one phone, because the whole thing comes off by hand in seconds. TruActive does not publish a handlebar diameter range, so measure the tube where the clamp will sit before you order if your bar is not stock.

Pros

  • Six swappable color bands included
  • Tool-free install, hand removal
  • Bottom ledge carries the phone's weight

Cons

  • Retention rests on elastic bands
Our verdict

Six bands, a bottom ledge and a clamp that comes off by hand make this the easiest mount here to move between two bikes and match to either.

Check Latest Price
6

JOYROOM JR-498 Best for Smaller Phones

91 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-7 in, case off
Weight
14.1 oz
Materials
Alloy steel, aluminum, carbon fiber
Damping
Dual pneumatic and anti-shake
View on Amazon

JOYROOM prints a limitation most makers bury. This mount is not suitable for an iPhone Pro Max or a Samsung Ultra with a case on, and the 7-inch rating applies to bare phones. That is an unusual thing to put in a listing, and it is the first thing to check before anything else about the JR-498 matters.

What you get if your phone does fit is the most elaborate damping in this group. A pneumatic element and a second anti-shake stage sit between the cradle and the bar, the tie rods are metal rather than plastic, and the ball head is reinforced, so the cradle holds an angle on a vibrating single instead of walking downward. Press-to-lock jaws take the phone in one motion, and the build feels heavier and more solid than the price suggests.

So this is the pick for a standard-size phone in a slim case, a base iPhone or an S-series in something thin, on a bike that shakes. If your phone is a Pro Max or an Ultra in a rugged case, take the BRCOVAN instead; no adjustment makes this cradle close around that combination, and a cradle that does not close is not damping anything.

Pros

  • Dual-stage vibration damping
  • Metal tie rods and reinforced ball head
  • Press-to-lock cradle

Cons

  • Clamp can shake and rattle on rough bars
Our verdict

For a standard-size phone in a slim case, the dual dampener is the most thorough vibration control here; Pro Max and Ultra owners should look elsewhere.

Check Latest Price
7

Lamicall BM02 Best for Casual Trail Use

90 /100
TKZ Score Outstanding

Key details

Phone Fit
4.7-6.8 in, up to 15 mm thick
Weight
7 oz
Materials
Aluminum, plastic, silicone
Operation
One-hand
View on Amazon

The Lamicall's pitch is one hand: push the phone into the four corner grips and it seats, and the same hand pulls it free without hunting for a release. That is the right idea for a trailside stop, and it explains why this mount turns up on everything from bicycles to treadmills. If the bar is round, someone has clamped one on.

The cradle takes 4.7- to 6.8-inch phones with a case up to 15 mm thick, which is thinner than the 20 mm the LISEN and the BRCOVAN allow, so a phone in a chunky rugged case may not seat all the way into the corners. The clamp tightens by hand against four rubber pads that take up the difference on an undersized bar, the head rotates to portrait or landscape, and at 7 ounces it is not the lightest thing you can bolt to a handlebar.

Where it fits is the everyday end of riding: a commute, a fire road, a light trail bike, a spare machine that lives outdoors. The lock does its job on that ground, the corner grips keep a thin-cased phone from wandering, and the price makes a second one easy to justify.

It is not the mount for a two-stroke over roots and rocks. Buy it for the bike that gets ridden gently and left outside, and keep an eye on the cradle and the clamp through a season rather than assuming it is permanent hardware.

Pros

  • One-hand in and out
  • Rotates to portrait or landscape
  • Cheap enough to buy two

Cons

  • Lock can be stiff to release
  • Durability has been inconsistent
Our verdict

A cheap, genuinely one-handed mount for commuting and light trail use, provided you treat it as a wear item rather than a permanent fixture.

Check Latest Price
8

JOYROOM JR-288 Best for Frequent Phone Swaps

89 /100
TKZ Score Excellent

Key details

Phone Fit
4.7-7 in
Weight
9.6 oz
Handlebar Fit
0.7-1.34 in
Lock
Four-arm auto-lock
View on Amazon

The JR-288 clicks. Drop the phone between four arms and they close on it with an audible snap, and the same arms let go when you press both side buttons at once. That is the fastest loading sequence in this group, and it is what makes the mount worth a look for anyone who takes the phone off at every stop.

The hardware around the cradle is sensible: a reinforced ball joint with a silicone pad under it, 360 degrees of rotation, and a clamp that covers 0.7 to 1.34 inches of bar, which takes a dirt bike's 7/8-inch tube. A separate high-speed lock switch pins the cradle for rough ground, and at 9.6 ounces it sits mid-field on weight.

The release is the catch. Pressing both buttons wants two hands, or a thumb and a steady brace against the bar, which is fine at a fuel stop and fiddly on a slope with gloves on. The cradle also springs shut on its own, so loading a phone one-handed takes a little practice before it stops feeling like a trap.

Buy it for a bike where the phone comes off often, a commuter or a trail bike you stop on a dozen times a ride, and where that secondary lock switch earns its keep on the rocky sections. On a long day of hard riding, the arms are the part to inspect when you get back to the truck.

Pros

  • Four-arm auto-lock loads in one motion
  • Secondary high-speed lock switch
  • Covers bars 0.7 to 1.34 inches

Cons

  • Durability has been inconsistent
Our verdict

The click-in cradle is fast with gloves and the double lock switch is a nice belt-and-braces touch, so buy it for a bike where the phone goes in and out constantly.

Check Latest Price

How We Tested Dirt Bike Phone Mounts

We started by gathering every handlebar mount we could find that listed a fit range wide enough for a phone in a case, then sorted them by clamp design — spring jaws, screw-down cradles, and the ones that lock — and by how much handlebar real estate each one ate. That narrowed the field to 14 mounts, which we ran for four months across trail bikes, a dual-sport, and one ATV that has seen better days.

I installed each one alone in the garage with a stopwatch running, because a mount that needs a second pair of hands at the trailhead is a mount you leave in the truck. I noted whether it needed tools, whether the clamp cleared the brake reservoir and the controls, and whether the cradle still gripped a phone wearing a thick case. Then I marked the clamp with a paint pen and checked after every ride for creep.

Ride testing ran on the same two miles of washboard fire road and on rocky single-track where the front end takes the worst of it. I filmed a few passes in slow motion to see how much the phone moved at speed, then pulled the footage to check whether the camera's stabilization was fighting the mount. Locking mechanisms got tested both ways: whether the latch held through chatter, and whether I could release it one-handed with gloves on while straddling the bike.

Durability came down to hosing each mount off after a muddy day and checking the pivot and hardware for grit and rust, plus re-checking clamp tension every couple of weeks. Cheaper mounts often survived the first ride and lost their grip on the sixth, so we kept riding past the honeymoon and weighed the price against how much fiddling each one demanded.

How to Choose a Dirt Bike Phone Mount

Start With the Bar, and the Space Around It

Most dirt bike bars are 7/8 inch at the grip, and a tapered bar fattens to 1-1/8 inch near the clamp, so a handlebar phone mount rated from about 0.5 to 1.26 inches covers both. The trap is length rather than diameter: handguards, a steering stabilizer, a GPS bracket and the brake line all compete for the same straight, round run of tube.

Measure the clear section between grip and triple clamp before you order, then pick a mount whose clamp body and socket arm fit inside it. The BRCOVAN's aluminum base is the most demanding of our picks here, and the cheapest clamps are the most forgiving.

Damping Separates a Mount From a Camera Repair

A single-cylinder engine on washboard trail sends a constant high-frequency buzz up the bar, and a rigid cradle passes all of it into the phone, where the camera's optical stabilization takes the beating. A mount with a dampener built in, like the BRCOVAN, or a two-stage system like the JOYROOM JR-498, puts a soft layer between cradle and bar so the phone stops shaking in sympathy.

On a Quad Lock the dampener is a separate purchase, and the maker recommends it for exactly this use. Riders who never leave smooth fire roads can skip this; anyone riding rocks and roots should not.

Retention You Can Work With Gloves On

Every mount here holds a phone; they differ in how you get it back. A locking toggle or a press button is positive but can want two hands, sprung arms are fast but can relax over a season, and elastic bands are the simplest and the least positive at the top end.

Think about the moment you actually use it: stopped on a climb, engine hot, gloves on. A release that takes two thumbs is one you stop bothering with at the bottom of the hill, and a mount you avoid using has already failed quietly.

Cradle Depth Matters More Than Screen Size

Screen size tells you almost nothing about whether your phone fits. What counts is the depth the jaws take with the case on, which runs from 15 mm on the Lamicall BM02 through 18 mm on the TruActive to 20 mm on the LISEN and the BRCOVAN, plus the cradle's internal length, because a big phone in a rugged case is longer than the same phone bare.

Measure the phone in its case with a ruler, thickness first and then overall length. A case that pushes past the ceiling means the corners never seat, and a mount that does not seat is a mount that lets go.

Weight, Bulk and the Second Bike

On the bar, weight is not free. A 400-gram metal mount holds an angle better than a 60-gram plastic one, but it needs a solid straight length of tube and it swings harder when the bike goes down. Match the mount to the bar you have rather than to the spec you admire.

If one mount moves between bikes, buy by the clamp: a hand-tightened buckle, as on the LISEN or the Bovemanx, takes seconds and needs no wrench, while a security-screw base is a deliberate two-step. Two bikes and one phone is usually cheaper solved with two inexpensive mounts than with one clever one.

Frequently Asked Questions

Final Verdict

Start with the BRCOVAN M26-C1. It is the one mount here that pairs a built-in dampener with a cradle long and deep enough for a big phone in a rugged case, and its clamp covers both bar sizes a dirt bike is likely to wear. That combination is what rough-trail riding actually asks for, and nothing else on this page offers all three at once.

If you already run Quad Lock cases on everything you own, its dual-stage lock is the most secure interface in this group and worth the extra purchases. If the budget decides, the LISEN does the same job for a fraction of the money and costs you only the largest phones.